| Sign In | Join Free | My himfr.com |
|
Special Dental Handpiece manufacture
7 Years
| Ask Lasest Price | |
| Brand Name : | medenstar |
| Model Number : | HPRD4-1 |
| Payment Terms : | L/C, T/T, Western Union |
Push Button Low Speed Dental Handpiece Contra Angle Reduction Dental Handpiece
Description:
4:1 reduction contra-angle
4:1 gear ratio, Internal irrigation system
Air pressure:245-392kPa
Atomized water pressure:200kPa
Atomized air pressure: 200kPa
Rotation Speed:3500-5000r/min
Push button type chuck
Bur applicable:Φ2.35mm , Φ1.60mm
Noise:≤70dB
Dental Handpiece Application:
- high speed handpiece
- It has unique appearance design and fluent outline.
- Smooth as silk, it has excellent texture.
- With people-friendly design, easy for operation.
- With best quality cartridge, easier for cleaning.
- With high-speed turbine rotation, it has better performances.
- Chucking power of chucking needle is 20N-45N.
- It is noise-free and stable.
- Applicable Bur: 1.6mm and should be conformed to ISO standard.
- Idling speed of handpiece should be no less than 370,000
rotations under working air pressure of 25- 30 pressure atmosphere.
- Special for operations such as clamping high-speed dentistry
machine needle to drill and grind teeth in department of
stomatology, it is more professional.
- It is only for people who have dentistry medical qualification
Maintenance:
1. Considering safety first, please be careful to use it with full
attention.
2. Be limited to dentists who held the dental treatment
qualifications.
3. Strictly forbid decomposition and reconstruction by
unauthorized.
4. Please run point testing on outside of patients oral beforehand.
If feel anomalies, please stop using immediately and contact with
our after-sales center.
5. When appears abnormal during using, please stop it immediately
and contact with our after-sales center.
6. It will cause a high noise using a center-vibration or bended
bur and a handpiece of which bearing has been worn, A long time in
this state will be harm to people’s hearing. Forbid using a
vibration or bended bur, if appear high noise, please replace the
shaft core early
7. Do not use a bending , cracking, deformation and unqualified
bur. If using it, may cause a snap, or a flying off to injury
accident during operation process.
8. Please ensure the bur chuck be clean. If with contaminant inside
of it, may causes bur clamping weaken or shaft core vibration.
9. Please run the bur under the provision rotation-speed by bur
manufacturers.
10. Do not crash, especially to avoid falling.
11. Please install a bur or a standard stick before using.
12. Aslo remember to install a bur or a standard stick when not in
using.
13. Please unload the bur and handpiece when the running stopped in
completely.
|
|
