Push Button High Speed Dental Surgical Handpiece With CE , ISO Certificate

Description:

Handpiece With Quick Coupling:M4/B2

Chuck Type:Push button

Bearing:Ceramic bearing

Workign Air Pressure:0.20-0.25MPa(0.22MPa prefrred)

Rotation Speed:350,000-400,000R.P.M(Standard Head);

280,000-320,000R.P.M(Torque Head);

Bur Applicable:Φ1.595-1.600mm

Spray:triple water spray

The Advantage of our Handpiece(Quietness·Smooth·High Torque·High Performance·More Reliable)
1. 4-port water spray
2. Clean handpiece head system
3. High precision push button type spindle
4. LED fiber optic lighting
5. Germany import bearing
6. Special stainless steel head and housing
7. Germany high precision dynamic balance technology
8. Super cutting power

Product Parts:
Consists of handpiece head, handle, caudal thread, cartridge.
Working Conditions:
1. Air pressure 0.25~0.30mpa,must be filtrated.
2. Use high speed dental bur with shaft diameter Φ1.59~1.60mm×21-23mm and roghtness less than 0.8um.
3. The amount of handpieces spray or water spray should be able to adjusted.
4. Hard glass fiber,can be repeatedly sterilized in high temperautre and pressure.
Product Scope:
Only used for drilling, molar of stomatology clamping high-speed dental burs.

HPA011QC Handpiece we Provide Three Kind Of Head For Choice

Features:

Connect the tubing(4 or 2 or 6 hole) if appears quick coupling handpiece, insert the quick coupling head in to, installation as shown photo:
Notice:1.Connect the required tubing according the model of each handpiece.
Handpiece With Quick Coupling
2.Only connecting correctly,fixed tightly and closely, can be used.

1. Inset quick couping
Insert quick coupling into socket connection of the high speed handpiece, push it forward,card tightly and firmly.
Notice:For quick coupling with decorative pattern, should be moving back before push forward, the can be card tightly and firmly

2. Extract the quick coupling
Hold the handpiece body and quick coupling by hands and drag them into opposition.
Notice:For quick coupling with decorative pattern, holding the decorative patten quick coupling, drag it in to behing.

Note:Only connecting correctly, fixed tightly and closely, can be used.

Maintenance:

1. Considering safety first, please be careful to use it with full attention.
2. Be limited to dentists who held the dental treatment qualifications.
3. Strictly forbid decomposition and reconstruction by unauthorized.
4. Please run point testing on outside of patients oral beforehand. If feel anomalies, please stop using immediately and contact with our after-sales center.
5. When appears abnormal during using, please stop it immediately and contact with our after-sales center.
6. It will cause a high noise using a center-vibration or bended bur and a handpiece of which bearing has been worn, A long time in this state will be harm to people’s hearing. Forbid using a vibration or bended bur, if appear high noise, please replace the shaft core early
7. Do not use a bending , cracking, deformation and unqualified bur. If using it, may cause a snap, or a flying off to injury accident during operation process.
8. Please ensure the bur chuck be clean. If with contaminant inside of it, may causes bur clamping weaken or shaft core vibration.
9. Please run the bur under the provision rotation-speed by bur manufacturers.
10. Do not crash, especially to avoid falling.
11. Please install a bur or a standard stick before using.
12. Aslo remember to install a bur or a standard stick when not in using.
13. Please unload the bur and handpiece when the running stopped in completely.

FAQ
1. Are you manufacturer or trading company?
We are manufacturer.
2. What does your factory mainly produce?
Our factory mainly produces high speed turbine handpiece, low speed handpiece, LED curing light, air prophy, dental bur as well as some other kinds of dental instruments, which own good features of high precision, high quality and long lifetime.
3. Can you offer OEM service?
Yes, we can offer OEM service. If you need it, welcome to contact me.
4. How long is your delivery time?
Normally, it is 5~10 days, but sometimes it can be 2~3 days if the products are ready in warehouse. Also, it depends on the quantity of your order.
5. What about the payment methods of your company?
At present, our company accepts T/T, Western Union, MoneyGram, and PayPal. If you cannot pay in these ways, please contact me.
6. Do you test the products before delivery?
Yes, we are strict at the quality of products. All your products (100 percent) will be tested before delivery.
7. Can you provide sample products?
Yes, we can provide sample products for the buyers. Please understand that the express fee and the sample costs should be paid by the buyers.
8. How long is the warranty?
The bearings have three-month warranty and the other products have one-year warranty. The warranty is valid in 3 months / 1 year since the date of delivery.

Medenstar is specialised in manufacture and supply high quality Dental Handpiece, etc for more than 10 years in Shanghai, China，we are also Golden Dental Supplier in Alibaba with Trade Assurance for our overseas clients guarantee.

Our company enjoy all kinds of professionals including management team, salespersons, engineers and technicians, who are rich experienced in dental industry, advanced technique (pass CE certificate) and complete quality control systems.